leaky gasket - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 01-12-04, 11:17 PM Thread Starter
Registered User
Join Date: Jan 2004
Posts: 2
leaky gasket

There is a leak in the gasket right above the oil pressure switch. It is a Ford Falcon EA 1990. Any recommendations please.
hkhattak is offline  
Sponsored Links
post #2 of 5 (permalink) Old 01-12-04, 11:28 PM
BA'o'Matic 100% working.
Dellboy999's Avatar
Join Date: May 2003
Location: Victoria
Age: 44
Posts: 3,838
Re: leaky gasket

Well if you really believe it is not worth repacing the gasket, get some black silicon gasket and seal the hole :0)

I did put something here, but it vanshied, I think

"So long and thanks for all the fish!"
Dellboy999 is offline  
post #3 of 5 (permalink) Old 01-13-04, 12:00 AM
Registered User
Join Date: Jun 2003
Location: Melbourne
Posts: 108
Re: leaky gasket

The best advice I can give: replace the gasket, but don't go patching things up with any kind of gunk because it's usually only a temperary measure (and a poor maintenance habit as well).
SkidMark is offline  
post #4 of 5 (permalink) Old 02-11-04, 08:08 PM
Registered User
thetrueslayer's Avatar
Join Date: Feb 2004
Posts: 30
Re: leaky gasket

i used black silocon gasket on my timing chain cover , but its temporary till i get a new crank. its not the best stuff to use but its not as bad as i thought it would be, just make sure if u use it that its spread evenly. i also think a gasket would be the best way to go though.
thetrueslayer is offline  
post #5 of 5 (permalink) Old 02-11-04, 08:57 PM
Veteran Ford Member
Join Date: Jan 2003
Location: Melbourne, Australia
Age: 30
Posts: 5,083
Re: leaky gasket

I once went to look at an EB S pack, popped the bonnet to check it out, gasket goo around the base of the head. Promptly closed the bonnet and walked off the lot.
psycho chicken is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Inline 6 Tech
Gear in this thread - Powered by O'Reilly Auto Parts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
My head gasket......another history docomo Inline 6 Tech 7 11-21-03 12:33 AM
Stop my head gasket from blowing! XRated Inline 6 Tech 15 09-06-03 06:34 AM
Exhaust Gasket (Extractors to Cat keeps blowing out) AU1SIXA Exhaust 6 08-08-03 10:55 PM
Some sort of head gasket sealent? YOOT Inline 6 Tech 15 08-08-03 03:41 AM
Thermostat housing gasket crYnOid General Tech 9 02-06-03 05:29 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome