Fordz

What do you guys think of MegaTork Camshafts?
I will be possibly purchasing one for my 250xflow alloy head.
Anyone have any experience with these camshafts?

http://www.vpw.com.au/asp/product_pa...sub_cat_id=136

There's a link..
Interested to see your thoughts.

clevo400

The grinds are the same as my old Precision PC251 but the actual billet might be different or weaker. I don't know. Price is good. I had 282/292 219/219 0.487"/0.487". Worked well with the 350H, Cain manifold, Motivator extractors with 2.5" sys.

__________________
regards
Stephen

Fordz

Howmany rwkw did you get with that setup? 0-100kmh? 0-400m times?

BLO GMH

Megatork is just a budget brand made by Crow.

__________________
- BLO GMH

-> 1987 XF Fairmont Ghia - Silver, 4.1 EFI, T5, LPG, Clive Cam, Megatork Valve Springs, Crow Pushrods, Crow Timing Gears, Pacemaker Headers, Hi Flow Cat, Mandrel Bent Exhaust, ESA Straight Through Muffler, Grey Velour Interior, Full Electrics, Trip Computer, MOMO Race Wheel, King Spring Super Lows, Monroe GT Gas Shocks, Nolathane Bushes, EL XR8 Rear Axle w/ 3.45 LSD, Snowflakes

clevo400

Wouldn't know. I thought 150 kW at the flywheel. Did 6.5 secs to 100 kph and I thought 14.999 secs down the quarter. Never tested it officially as it always beat V8s to 100 kph and at the lights. Very fast to 150 but after that it slowly went to 170 kph so I guess the quarter times would be disappointing.

__________________
regards
Stephen

clevo400

Didn't know that !!! Good to know cause they're cheap and worth the $150. Good grinds too. Similar to Cam Dynamics which is a cheapie Crane.

__________________
regards
Stephen

RUNRVS

megatork are made with cheaper and weaker billets than most other cam manufacturers and are designed for the person who wants to do it on a budget.

Fordz what happened to the cam you were enquiring with me about... if you knocked it back because I wanted $50 for it when in reality you would pay $200 or so from a cam manufacturer then I'm pretty disappointed

__________________
XF Falcon - LPG Turbo Coming Soon

Fordz

Nah man, your cam is an absolute bargain, its just a bit smaller than what I was after. Sorry mate.

RUNRVS

my advice is not to go with megatork... try wade or waggot or even tighe cams

__________________
XF Falcon - LPG Turbo Coming Soon

BLO GMH

or Clive Cams in Nunawading, Vic

Fordz - sorry i didn't get back to you about the headlights, i decided i really didn't need them....need $$ for other stuff!!

good luck with the cam.

__________________
- BLO GMH

-> 1987 XF Fairmont Ghia - Silver, 4.1 EFI, T5, LPG, Clive Cam, Megatork Valve Springs, Crow Pushrods, Crow Timing Gears, Pacemaker Headers, Hi Flow Cat, Mandrel Bent Exhaust, ESA Straight Through Muffler, Grey Velour Interior, Full Electrics, Trip Computer, MOMO Race Wheel, King Spring Super Lows, Monroe GT Gas Shocks, Nolathane Bushes, EL XR8 Rear Axle w/ 3.45 LSD, Snowflakes