Whats the best brand of Plugs and Leads thats available for an ED XR6? There was a discussion earlier on the subject but it was only regarding the engine with the extra 2 cylinders :HAHA: :hy:
Whats the best brand of Plugs and Leads thats available for an ED XR6? There was a discussion earlier on the subject but it was only regarding the engine with the extra 2 cylinders :HAHA: :hy:
Whats the best brand of Plugs and Leads thats available for an ED XR6? There was a discussion earlier on the subject but it was only regarding the engine with the extra 2 cylinders :HAHA: :hy:
Not sure if the ED XR6 donk uses the same plugs as the EF XR6, but if they do, i'd go for the NGK's as they have a seperate listing for XR6 Falcon plugs, and they are different to the standard ones as they have a longer 'reach', Bosch don't seem to differentiate between standard and XR6 plugs, don't know about the other brands though.
I use NGK R's for plugs, & "Eagle Eliminator series" (effectively a magnacore type spiral wire lead - but cheaper) in my ED XR6.
Works quite well:s5
hehehe
Best of luck with the fitting of the new leads:s5
TIP RACE 6 #1
To remove the old leads use a piece of 1/2" flat strap with a 1/4"90 degre bend on one end & grind, file a smooth ( type curve and attack the coil pack between the inlet tubes .
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!