Turbo Kits for ye olde I6! - Page 9 - Ford Forums

fordboy1996 · 08-19-2003, 20:55

Hahaha very true matey!!!

has anyone seen that turboed go-ped with NOS??!!

Dave.

qwikcorty · 08-20-2003, 02:14

yeah i seen it, intercooler and all!

ive got a motorized scooter, with a 33cc sthil engine. gets to 50kmh at 7000rpm, i want more though.

fordboy1996 · 08-20-2003, 02:40

get NOS!!!! you can get the little soda stream bulbs with Nitrous Oxide in them....give that a burl!
�ou'll probably need to up the final ratio to get that speed up....hahaha you might hit like 90km/h with NOS!!!!

Dave.

qwikcorty · 08-20-2003, 03:01

im acctually working on a supercharger at work in my spare time for it, a centrifugal type. with a drive of around 1:6 will give the impellor 42000rpm at 7000rpm. hope it works i dunno yet lol.

for now ill pour some model fuel in it which is methanol with 15% nitromethane!

ill try get pics of it!

fordboy1996 · 08-20-2003, 09:53

sounds good matty!

Dave.

gm dstroya · 08-21-2003, 03:33

seano14:

mate for sure you can turbo it

i'd suggest get a manifold made up (600-900 bucks) to suit a t4 if its a 250 if its a 200 or smaller a t3 will be fine.

run the turbo very low (down to just above the sump) run a fmic that has the core going verticaly (airflow goes from top to bottom).
run ur standard log head intake manifold and just put a boost pipe to the carby and make it blow thru set up.

altenatively you can make it a suck thru carby setup (dosnt require a cooler) and then run a short boost pipe into the standard inlet manifold.

3rd option is to make both custom intake and exhaust manifolds run efi as well and a fmic

4th option would be to transplant a ohc engine into the bay and turbo that.

cheers.joe.

seano14 · 08-21-2003, 03:38

thanks for the replies, they've been most helpful!

fordboy1996 · 08-21-2003, 06:31

Joes' the man!

Dave.