silver fox

has any body used one of those 383 clevo stroker combos from pro comp the place is in hoxton park road liverpool sydney any comments

brenx

I'm pretty sure at least 2 people here are in the build stages using that kit.

__________________
XB Fairmont (street car) 11.07@123.02mph.

351AFD

Its up to you but PRO COMP cheap and nasty.

brenx

I've used procomp components myself. Everything (box/coil) but not the dizzy. It's the same quality as an MSD analog (6 series unit). The MSD has a s**tload easier way of setting the rev limit

Quality just as good as any other. I know Montyv8 (in the process) CH7472 and Neek are actually running the units with no problems.

__________________
XB Fairmont (street car) 11.07@123.02mph.

YLD-377

i agree with 351AFD. shit gear . ur better off spending the little bit extra and buying Eagle

russxr67

Before anyone gets too excited and rubbishes thecranks any further why don,t you chill out and wait until someone has one up and running. I agree some of the pro comp gear is less than stellar but there is no value in bagging the cranks until you have actually run one and broken it. I,m one of the guys who has purchased one and so far the quality seems ok and the machining is some of the best i have seen. If and when mine breaks i,ll be the first to shitcan it.

xb351coupe

Well said !

__________________
1974 XB GS Coupe - 351C FMX 9". 208RWKW (280RWHP) 12.92 @ 105.9M MPH (28/6/06 WSID)

xdclevo

I would still want to know if any waranty. If an electronic box or distributor fails, it really is an easy fix, but if a crank breaks, there is way more to worry about. Still, i am believer on not lynching anyone if there has been no problems. I recon this is one product though, that will be fine.

pinkbits

i bought 2 ignition set ups and a mate put one in first , after about a month of his ignition cutting out and not being able to find problem i sold mine , as i said we couldnt and still havnt found what is faulty