jim1320

Went down last nite. At Mir budd creek track first nite out this year only 4 passes.


1.48 60 ft
4.32 330 ft
6.73 1/8 mile
101.32 mph
8.84 1000
10.62 et
126.26 mph


1.49 60ft
4.31 330ft
6.73 1/8 mile
101.21 mph
8.83 1000
10.62 et
126.18 mph

first 2 passes timming was down on car about 24

1.44 60ft
4.21 330ft
6.57 1/8 mile
103.83 mph
8.62 1000
10.369 1/4
128.81 mph
set timing at 26-28 hard to see at nite
exhaust temp. 13.64

Time to race dial a 10.35

10.35 Dial
.48 et
1.43 60ft
4.20 330 ft
6.35 1/8
104.27 mph
8.86 1000
10.34.4 et
128.31 mph

Best time to date 10.34 @128.31 mph dial 10.35 and lose with 10.344 too fast .Other guy light was a little better .031 vs .048 . May try pair slicks next and play around with timming more its was busy at the track last nite. running on 104 gas and exhaust was 13.53 .Shifting at 7000rpm going thur at 7200 to 7300 at the trap. I know more rpm !!! dyno sheet at 7000rpm 696 hp and 728 hp at 7300 rpm down 28 hp at 7000rpm. in a perfect world good time first time nothing leaking and drove it in the trailer .
Jim

geos sho

I am new here what kind of car and how much do you and your car weigh pretty impressive #s what altitude are you at?

__________________
my need is speed

jim1320

80 feet above sea level.
1970 Mustang Mach 1
393 cu cleveland engine
c4 tran.
4.56 gear 9 inch ford
3250 lbs
chi heads and intake
Jim

geos sho

very impressive, Im 14.90s @ 92 mph. @4150 lbs mild hyd .030 over c-6 4.11s 72 torino spt fastback! And thats @ 6000 feet What crank/rod/ bore combo are u using? I have been watching those chi heads since they came out I just can't seem to pull the trigger on them yet.

__________________
my need is speed

jim1320

393 cleveland engine
1050 holley dominator carb. 85 jets square no power valves
Chi intake stock no porting
Chi heads 225 cc hand porting bu MME Mark
custem camshaft by MME Mark
flat pistons srp about 11.45 comp.
3.85 crankshaft
6 inch Chev rods eagle
melling oil pump with oil kit in block
deep oil 8 quarts
c-4 tran. with Ati 8 stall flashing at 4700 last year
4.56 gear
28 x10.50 MT slicks
car weight is 3250 i think

Best time last year 10.51 et 127 mph

Now change is porting the heads and new custem camshaft
First time out 10.34 et at 128mph shifting at 7000rpm engine more power at 7300rpm about 35 hp . Went got new Slicks this week end. Think will need a new big stall.
Jim


Good luck on your car!!
Jim

geos sho

shit i've got 18 yrs on this motor and had the car since 1981,the motor i originally built, got 2 passes @ Norwalk, raceway Ohio and stuck 2 valves, still went 12.56 @ 109 on 6 cylinders, crower split cam,solid lifters, roller rockers,.030 over,trw flat tops, 4v closed, ported torqerII intake, Still have it and its ready to go in something, I still have to be carefull cause of my altitude. Good luck with your ride your way ahead of me!!!!!George

__________________
my need is speed

jim1320

All about Time and Money . What type car??
Jim

geos sho

72 Grand Torino Sport Fastback, Heres A pic:
Picture002-1.jpg - Image - Photobucket - Video and Image Hosting
I have had it since 1981 used to be drk jade green, then torino red pearl, now the Audi A-4 blue and custom stripes fun car, never let me down

__________________
my need is speed

jim1320

Good looking tornio . use to have 71 gt with a 351 cleveland year ago
Jim

geos sho

Thanks I am redo a 71 mach 351 ho 4sp car for a buddy I will post some pics soon, i have already done doors,fenders,hood,decklid now working on body
2nd owner drk grn,silver had a 1/4 put on in 74 terrible job but gonna come out good.78,000 original miles. Geo

__________________
my need is speed