xacoupe

Street Machine for once has something interesting ... alloy heads for clevelands for about $4200 aus ..complete.
They apparently need a bit of a tickle to get them flowing really well but they are looking at 525hp and about 450ft/lb potential for very mild work .
I need work so I can pay for it !!!!:crazy1: :crazy1:
I also wonder what specs the valves and valve springs are .. is it one of those 'complete' efforts where if yoou want more than 250hp you need to change everything ... but anyway..good to see some decent aftermarket heads !

max_torque

just the ticket for the homemade Boss motor!

__________________
Ford to Victory!

Falchoon

Could you make a Boss motor out of a late model 5.0 (or 5.6 ) EFI Windsor?

__________________
You know, somebody actually complimented me on my driving today. They left a little note on the windscreen. It said, 'Parking Fine.'So that was nice.

____o00o_=^..^=_o00o____

ebxr8240

Why would you bother when you can get Edelbrock's/ Holley,then more upmarket Trick flow's[T.F.S] Twisted Wedge heads starting price $2200 up to $3.000 full cnc ported..www.trickflow.com

AFR /Airflow research have excelent heads 165cc 185 cc &205cc
www.airflowresearch.com All these headswould flow 400 + H.P out of the box with all the good valve gear...Pluss they have inlets to match why bother???

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

XR9UTE

You certainly can Falchoon!
It will require modification of one of the larger EFI intakes like the Edelbrock Victor 5.0,TFS-R,Holley or (if you're rich)BXR. Port spacing is the same but shape is different,you'd be port matching anyway though. Bolt holes will need to be modified to suit the angle bolts on the cleveland heads.
Easy!

It's true what ebxr8240 says; Aftermarket windsor heads are plentiful and make good power and torque. Still if you wanted to be different cleveland heads would be good.

Pete.

johisaree

hi wayne just joined your forum
i was noticing that you are talking about some very hi dollar alloy heads.
i am some what left wondering
why all those dollars, because i run a cleveland , with 351-c open chamber heads and with exhst plates and , other roller parts comp cam
i am pulling approx 500hp so as i see it for all of this money i can get 35 more hp. i dont see the bang for those hi dollar heads.
just my opinion thank you wayne

4Vman

Dont bother, the late model wheezor blocks are weak and crack in half with decent HP or abuse..

__________________
F6: the fastest factory 4 door falcon in the world!

brenx

Someone's been thread mining! The originating post was done back in 2002!

__________________
XB Fairmont (street car) 11.07@123.02mph.

TruBlu351

So old you could carbon date it!

__________________
XE Falcon
393 Tremec TKO 9"

xdclevo

$4200 complete!! Holy crap. I have ordered spares too. hehehe