Cam Selection - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 09-24-04, 06:09 PM Thread Starter
Registered User
Join Date: Sep 2004
Location: Hervey Bay Qld
Age: 45
Posts: 62
Question Cam Selection

I'm looking for help on cam selection for my vehicle. 351c, 2v open chamber heads with hardened seats for premium unleaded, std rockers and valve springs, double row timing chain kit, flat top pistons, compression in all pots 175-180psi, engine had pistons and bearing kit put through it about 15000 miles ago, 600 speadbore holley, performer manifold, pacemaker extractors, C4 trans with stock convert, 9inch 2.75 lsd. All this in a 68 XT Fairmont Sedan.
I'm just wanting a good drivable cam to suit over the std unit as this car is only used as a street vehicle.
01fm is offline  
Sponsored Links
post #2 of 2 (permalink) Old 09-24-04, 10:53 PM
82XE 351c
Join Date: Jul 2004
Location: North Coast, NSW
Posts: 627
Re: Cam Selection

have been looking at this similar combo
go for either of these..
Crow cams...
there is a cam sheet u can put in aswell for their advise. crow go for about $160 to $170.
i ended up spending a bit more and thought i could handle the 21603 :)
putting it all together in next couple weeks..
pracy is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Cleveland Tech
Gear in this thread - Powered by O'Reilly Auto Parts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
chasing stroker kit for 351clev tony xa Cleveland Tech 95 06-01-04 07:29 PM
*Please read!* WANTED JMM and Crow cam owners in brissy or coast!! Rollin Inline 6 Tech 60 05-31-04 03:37 AM
Found: cam selection info AU2XLSV8 General Tech 9 05-22-04 05:59 PM
Tips for EL XR8 camshaft change (long) EL1XR8 Windsor Tech 19 03-25-04 02:28 AM
well, my car is offically GHEY Rollin Australian Falcons 83 01-25-04 09:18 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome