61oat

i have just boughta xb gs sedan with a 351 standard compression,2v heads,4v valves,tq20 cam,roller rockers,elbrock torker single plain,mallery twinpoint dizzy,650 double pumper 47772,4 into 1 extractors with 2&1/2 exaust with x pipe and will be having it dyno tuned soon, thought it might be fun to see how close a "gestamation" realy is if you want to try gess the rwhp . it has 3.9 9inch diff gears and a top loader. cheers

xdclevo

270 Rwhp

crochunter

I think you might be pushing it a bit with that hp heh XD CLEVO.

__________________
http://motorvator.7.forumer.com/

xdclevo

In Cairns it would be 220rwhp. hehe

69XW

245 RWHP for me

TruBlu351

G'Day 61oat,

Are these the TQ20 specs: 214/224 @ 0.050 .512/.536 lift?

I've got one of those little puppies. Good low down little torquey cam. The only difference to my setup is I run an MSD ignition (not that it'd add much), I have stock 2V heads, valves & rockers and a weiand xcelerator. I need a little heavier springs but can't be stuffed waisting the money on this combo....so I lose a fraction up top.

So.....after rambling on.......I make 250-255rwhp.

I reckon you should have 260-270rwhp. It'll go great with those 3.9's. My 4.11's are too low for that cam....still fun though.

Sounds like you already know the HP numbers? C'mon, let us in on them

__________________
XE Falcon
393 Tremec TKO 9"

xcgxl

Mine made 267RWHP with 750VAC, dual plane Perfomer, Genie tri Y headers, 3.0:1 diff and auto. Cam is a Crow Cams 211367 IN.33/73
EX.78/35 286
293 226
232.530"
.548" 2700-5800 RPM
"Popular hot street cam which delivers strong strip performance"
Heads are relieved closed chamber with standard sized valves.

You should make 270 easily.

__________________
1978 XC Fairmont GXL, Emerald green, Jade Int. 351C, 750 VAC, C10, 9" LSD
Air, steer, power windows................

61oat

sorry don't know the rwhp yet, or the cam specs, will no by friday though

TruBlu351

OK cool. Keep us posted!!

__________________
XE Falcon
393 Tremec TKO 9"