clevo extractors for XY - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

smally351 · 02-26-2005, 18:45

just wondering if anyone has had any dramas fitting tuned extractors to an XY?

considering pacemaker 4070's, anyone used these?

xw383 · 02-26-2005, 20:41

I am using pacemaker 4into1 at the moment bought from a mate. What a great off the shelf product. The only prob being driverside near steeringbox, a pretty tight squeeze.Don't forget to put in new engine mounts, damadged #3 pipe on my old tri-ys because of a worn engine mount.

falcon coupe · 02-26-2005, 21:05

I use the 4070's, no probs at all.

brenx · 02-26-2005, 22:38

4070's are whats in mine but are about to be heavily modified as they foul my trans.

Brenden

GammaBoy · 02-28-2005, 08:17

Had 4070's in my XY before I went to 4075s with my CHI heads. bitch to fit with powersteering.

xrgt · 02-28-2005, 15:39

fitted 4095's without major issue.

it's a good idea to reverse the clutch slave cylinder for better clearance and less heat. Use 28mm barstock with 10mm hole for bolts

crzyxf · 02-28-2005, 16:00

Got the 4070s in my xy w/o a drama

xyfmtjoe · 03-01-2005, 00:00

im trying to get the drivers side in mine now whats the trick? im not having much luck

brenx · 03-01-2005, 15:13

Quote:

Originally Posted by xyfmtjoe

im trying to get the drivers side in mine now whats the trick? im not having much luck

Have the car lifter around 1->2m off the ground and install it from underneath. You may need to undo the engine mount and lift the engine up so it tilts but thats not usually required.

Brenden

xyfmtjoe · 03-01-2005, 23:20

Tried all of the above but they wont go btwn starter boss and steering box in my xy! its going to have to wait till weekend now thats what 15hr days do to my motivation!