JG33PY

any one here used this camshaft or similar,

competition cams 280h
part # 32-225-4
in@50, 230 ex@50, 230 both in & ex have .530 lift

brenx

better to ask @ 351cleveland.net as a few blokes there run hyd comp cams.

Most here have gone solid cams from memory. I'd guestimate 65% solid and 35% hyd?

[edit] I run 248@50 on both myself. It should be a reasonable cam with 2V heads.

Brenden

__________________
XB Fairmont (street car) 11.07@123.02mph.

JG33PY

thanks, brenden. i've been a lurker there for a while.

xbgs351

Have had experience with a Sig Erson hydaulic cam with 235/235 @ 50 thou, 0.315/0.315 lift and 108 LCA. With an Edelbrock Performer with a cut down divider, 2" carb spacer, 750DP and Tri Y's it, ported heads (around 450hp) it made 235 rwkw. Have also used this cam on a straight gas motor.