EFI for My cleveland - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

DansEdgli · 10-24-2003, 19:55

Has anybody had any luck converting their cleveland to EFI.

This website sells EFI manifolds for the clevo.

http://www.manifolds.com.au/products.html

Would it be possible to run one of these and use a fuel only computer to make it work? Would it be doable with a normal aftermarket ECU?

What else would be needed with the manifold to make it work? Other than injectors, fuel rail throttle bodies?

I know that XR9 UTE is against these but this way couldnt be that expensive to do could it?

Thanks guys
dan

EBXR · 10-24-2003, 23:15

There is also Holley Pro-jection. Not too sure on how well it performs though. But then you wouldn't need a special manifold.

DansEdgli · 10-24-2003, 23:35

Yeah I looked it up a few days ago and the biggest size I could find it comes in is 780cfm. Im not sure how that would perform with forced induction. Especially in a blowthrough configuration.

Does anyone have any info on this Holley Projection?

Thanks
Dan

.

brenx · 10-25-2003, 00:21

Cylinder head inovations (CHI) http://www.chiheads.com will have an EFI manifold out soon. Cost is about $700 (guestimate).

I'll be snapping one up to replace the Weiand Xcellerator.

Brenden

not ford · 10-27-2003, 23:12

There's a custom efi manifold for sale at injection conection in Perth. He wants $1500 for it. Includes rail, dissy, tb, manifold, and injectors.

DansEdgli · 10-28-2003, 05:25

Why cant i live in perth?
Thanks for the info guys. I might stick with the carby and spend money on other stuff for a while.

Dan

Fat F100 · 10-28-2003, 14:40

You would still need an ECU to control it all aswell. MOTEC would cost $1500-$2000 to set up (including the parts) but they are the best!

qwikcorty · 10-28-2003, 23:51

Im building a throttlebody now for my 351c,
made from a 4brl carby base with 40mm bores, and 100mm trumpets on them with injectors hovering over the top.
all controlled by a recently acuired wolf 2d ecu.

the base i think flows around the 800cfm mark.
im using 4 650cc injectors which is good for around 450-500hp i think.

anyways ill take pics of the base plate/ram tubes soon.

im also trying to do it for less than the price of a decent carby, which can cost 1200+ dollars

I_wanna_XA · 10-29-2003, 03:34

http://www.speed-technology.com/efi_throttle.html

DansEdgli · 10-29-2003, 04:22

I cant see anything on that page? Just the blue background and no info.