gus351

Well guys,

Its been 10 WEEKS since i said the car was going to the dyno shop and i can FINALLY give you some numbers.

Lots of little problems like dead MSD unit, broken starter motor, electronic pickup in dizzy playing up and one set of spark plugs cooked as well.

610ft/lb torque at 4200rpm, 13lb boost
approx 420 rwhp at 4900rpm, 13lb boost

We can't get a more accurate HP reading higher up because we are getting belt slip above 5000rpm and loss of boost pressure (drops to 6psi). Going to put on a tensioner to get more wrap around on the blower pulley and then see how we go.

Hopefully there's another 100 or so HP in it from 5000 to 7000, given its got a fair bit of cam left in it.

Just glad to see it's coming together at last! Will post a sheet or Video as soon as i can

cheers
gus351

brenx

You'll be surprised how much power it picks up when the belt slip stops. With some extra rpm, I still reckon you'll go around 440rwkw. Your already @ 300+rwkw

__________________
XB Fairmont (street car) 11.07@123.02mph.

Work Horse

Wow impressive stuff keep us posted gus351

TruBlu351

Holy cow! I though only Mack trucks and Kenworths only had torque down that low!

You running it on diesel?

Well done

__________________
XE Falcon
393 Tremec TKO 9"

ZK 351

awesome stuff.

falcon coupe

Dam, that's impressive with LPG, go the super Taxi !!!

__________________
Member of the the Trans Pacific Moderator Tag Team

TruBlu351

Can anybody tell gus351 where to upload a video so we can all see this Cobra's 351 hiss?

__________________
XE Falcon
393 Tremec TKO 9"

RAVEN

this link is free video hosting...

http://www.putfile.com/

__________________
240rwkw slug.

Rhett

Very tough with more up its sleeve !

CONGRATS on a very well thoughtout and trick looking motor !!!!

gus351

hi all,
i trust you were all good boys and Santa gave you all someting nice for those tough Fords out there.

I've finally got a bit of video to share with everyone.

So here 'tis
http://www.putfile.com/gus351

Cheers
gus351