got car dyno'd with chi stuff - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Cleveland Tech
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto EscrowInsurance

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 02-21-2006, 23:47   #1 (permalink)
Registered User
 
69XW's Avatar
 
Join Date: Jan 2006
Posts: 26
got car dyno'd with chi stuff

Finally got car going.
185cc CHI heads
CHI manifold
crow solid 238 242
357 cubes
270 rear wheel kilowatts
360 rear wheel horsepower
through c10 and 3.5 nine inch 3500 stally
very happy indeed pulls strong straight off of idle and first and second gear up in smoke with my 245's (near on brand new).Recommend this set up to anyone.
cheers
69XW is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-22-2006, 00:02   #2 (permalink)
Registered User
 
xdclevo's Avatar
 
Join Date: Mar 2004
Location: Cairns
Posts: 1,946
Re: got car dyno'd with chi stuff

Nice results
Are you putting down the 1/4 dyno for a run?
xdclevo is offline   Reply With Quote
Old 02-22-2006, 00:12   #3 (permalink)
Registered User
 
Join Date: Jan 2005
Location: Brisbane
Posts: 181
Re: got car dyno'd with chi stuff

Nice gotta be happy with that.
xw383 is offline   Reply With Quote
Old 02-22-2006, 00:15   #4 (permalink)
Registered User
 
xb351coupe's Avatar
 
Join Date: Feb 2005
Location: Sydney
Posts: 343
Re: got car dyno'd with chi stuff

Very nice result, should pull mid to low 12's easy !
__________________
1974 XB GS Coupe - 351C FMX 9". 208RWKW (280RWHP) 12.92 @ 105.9M MPH (28/6/06 WSID)
xb351coupe is offline   Reply With Quote
Old 02-22-2006, 00:28   #5 (permalink)
Registered User
 
69XW's Avatar
 
Join Date: Jan 2006
Posts: 26
Re: got car dyno'd with chi stuff

thanks guys
very happy indeed with the set up, will take to the track eventually.Can't believe the amount of torque i have picked up with this set up versus the 2'vs (ported) with xcellerator.
69XW is offline   Reply With Quote
Old 02-22-2006, 02:16   #6 (permalink)
74 XB Fairmont
 
brenx's Avatar
 
Join Date: Sep 2001
Location: Cranbourne, Vic
Posts: 5,113
Re: got car dyno'd with chi stuff

Congrats it's a definate 12 sec pass easy. 69XW : The difference is huge!
__________________
XB Fairmont (street car) 11.07@123.02mph.
brenx is offline   Reply With Quote
Old 02-22-2006, 02:19   #7 (permalink)
Registered User
 
crochunter's Avatar
 
Join Date: Jan 2005
Posts: 828
Re: got car dyno'd with chi stuff

Yes a very good result there. Must be pleased with that.
crochunter is offline   Reply With Quote
Old 02-22-2006, 02:43   #8 (permalink)
Registered User
 
xdclevo's Avatar
 
Join Date: Mar 2004
Location: Cairns
Posts: 1,946
Re: got car dyno'd with chi stuff

It equates up near 480hp, so with some rear gear in it, i would be real surprised if it didn't easily run 11's. Must be fun roasting them tyres.
xdclevo is offline   Reply With Quote
Old 02-22-2006, 04:42   #9 (permalink)
Registered User
 
Join Date: Apr 2004
Location: VIC
Posts: 210
Re: got car dyno'd with chi stuff

Hey 69xw well done,,i have the exact same setup as you including that cam, just got to put it together,,can i ask what extracters and carbie you are running,,
And what sort of revs does it pull to with the small port heads.

cheers Mate
__________________
Feed my will to feel this moment urging me to cross the line..
We'll ride the spiral to the end and may just go where no one's been...
M.J.Keenan
aussiemart is offline   Reply With Quote
Old 02-22-2006, 15:53   #10 (permalink)
Registered User
 
69XW's Avatar
 
Join Date: Jan 2006
Posts: 26
Re: got car dyno'd with chi stuff

Quote:
Originally Posted by aussiemart
Hey 69xw well done,,i have the exact same setup as you including that cam, just got to put it together,,can i ask what extracters and carbie you are running,,
And what sort of revs does it pull to with the small port heads.

cheers Mate
Thanks aussiemart
carby is a mighty demon 825 Barry Grant
Mechanical H/V Holley fuel pump with standard fuel line into pump and 1/2 inch line up to carby.(wasn't running lean at all in the mid to high 12's).
1 7/8 inch pacies with 3 inch collectors H pipe 2.5 inch exhaust all way through with Lukey mufflers.
pulls hard all the way to my 6600rpm limiter(havn't rev'd it any harder yet but feels very strong up to that point).
Hope this helps.
69XW is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Cleveland Tech



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 12:18.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.