Need help with roller lifter question? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 10-13-08, 06:21 PM Thread Starter
Registered User
Join Date: Nov 2007
Posts: 1
Need help with roller lifter question?

I have a cleveland with a solid roller, had a problem with one of the valves, so I had the heads redone. I was adjusting the valves, then turned the engine over with the starter before I re-checked the valves. I noticed all of the roller rockers were flowing oil except one. I took the one roller rocker off and blew out the push rod, thinking maybe it was clogged and blew air through the lifter and everything seemed fine. I put it back together and I'm having the same issue. So I switched two rocker arms and push rods. The problem is with the lifter, my question is what can go wrong with a solid lifter and how should I check it?


1972PANTERA is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Cleveland Tech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome