New Edelbrock Performer Rpm 351-c Heads - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 03-02-05, 03:32 AM Thread Starter
Registered User
northiam's Avatar
Join Date: Feb 2004
Location: Victoria. Australia
Posts: 381
New Edelbrock Performer Rpm 351-c Heads

Found these heads on edlebrock web pages!!!
How much?
What size chambers?
Could be good.

Until now, there weren’t many options available when it
came to aftermarket head selection for the Clevelands.
Now, that’s all changed with the Performer RPM head for
351-C. Designed to work with the 351-C, 351-M, and 400-
M, they feature very streetable 190cc intake runners with
2.05" intake and 1.60" exhaust valves that provide more
than enough volume for outstanding power to 6500+ rpm.
Not only do they offer superior flow over a stock Cleveland
or 351/400-M head, but they also offer the flexibility to
work on the standard 302 or 351 Windsor block to build your own version of a Boss 302, or the infamous “Clevor”
engine! The intake and exhaust ports are in the stock location to further add to the streetability of these heads, and
can be made to breathe even better with minor port work. Note: When bolting on to 289/302 engines using 7/16"
bolts, use stepped head bolt washer kit #9680.
Heads for Ford 351 Cleveland Engines
Performer RPM 351 Cleveland...................................................................#61609*................. ......................#61629*

northiam is offline  
Sponsored Links
post #2 of 2 (permalink) Old 03-02-05, 11:39 AM
Registered User
Join Date: Jan 2005
Location: Merkel, TX
Posts: 51
Re: New Edelbrock Performer Rpm 351-c Heads

No parts, no price, parts on hold

From the preliminary data, they will be a street head, about like a good set of ported 2V's. I'll stick with my iron.
Falcon67 is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Cleveland Tech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
351 with 218cc CHI heads dyno run completed brenx Cleveland Tech 36 09-29-04 05:16 AM
chasing stroker kit for 351clev tony xa Cleveland Tech 95 06-01-04 06:29 PM
Availability of 351 Windsor GTENVY Windsor Tech 16 05-09-04 04:42 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome