xbgs351

Could somebody please measure the primary length of a set of Pacemaker 4 into 1 headers.

Thankyou

STROKEXD

Do you mean length of primary pipes? Well it varies depending on which pipe you're referring to.

But if you mean the collector length then it is 350mm long in mine...

__________________

xbgs351

Yes, the various primary pipe lengths.

xdclevo

I did a random measurement just to see is they were the same when mine were out, and they varied a lot. After that, i didnt measure anymore. I though if i went into it too much, i'd just be trying to reinvent the wheel.

__________________
10.70 @ 125.00 on the black fun top
408 Cube Cleveland.

xbgs351

Shortest is 31" and longest is 34".

xacoupe

interesting.. I thought they were longer than that.

xdclevo

This is a bit off topic, but does anyone run these 4 into 1's and have a c4 with a cast alloy sump(alloy pan). Reason is, i dont think i will be able to put the filler tube in my pan when i fit the auto. It has a brass fitting that comes out of the pan, so spaces the filler tube out too far. The extractors will make it impossible to get the filler tube in. Anyone have this problem??

__________________
10.70 @ 125.00 on the black fun top
408 Cube Cleveland.

STROKEXD

I have and it's really tight. Mine rubs against the extractors, maybe in the future I'll come up with another idea but it works for now.

__________________

xdclevo

When i had the standard pan, the filler tube just fit by about 1mm. The alloy one has the fitting that sticks out about an inch, so i think i'm in trouble. I will just have to have the tube shortened by an inch to fit it in. Where did you get your alloy pan for the c4?

__________________
10.70 @ 125.00 on the black fun top
408 Cube Cleveland.

brenx

That's wierd as I have plenty of room with the stock pan.

[edit] VPW http://www.vpwmailorder.com do the alloy pans for C4's. $225 from memory.

Brenden

__________________
XB Fairmont (street car) 11.07@123.02mph.