Pics of 393 stroker in bay - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

tony xa · 03-01-2005, 04:54

Just wanted to show off new engine .As you can see it has chi 218 heads,
chi manifold, mighty demon carbie, msd dis,gilmer drive . Things you can't see
scat 3.850 4340 crank ,scat 6.125 h beams ,ross forged pistons crow solid cam
roller rockers, pacemaker 4 into 1s, mallory fuel system ,and all braided lines .
Now just to do the wiring and then start up

russxr67 · 03-01-2005, 05:46

Looks great mate.You have obviously put a lot of time and effort (not to mention money) into that beast.Did you bother to dyno the engine at all? Any specs or predictions on hp?

davis · 03-01-2005, 07:51

Quote:

Originally Posted by tony xa

Just wanted to show off new engine .As you can see it has chi 218 heads,
chi manifold, mighty demon carbie, msd dis,gilmer drive . Things you can't see
scat 3.850 4340 crank ,scat 6.125 h beams ,ross forged pistons crow solid cam
roller rockers, pacemaker 4 into 1s, mallory fuel system ,and all braided lines .
Now just to do the wiring and then start up

I'd recommend insulating the fuel feed line to the carburetor or rerouting it. You don't want hot water lines transferring heat into the fuel line.

Clean looking installation.

:davis:

XFFAIRMONT · 03-01-2005, 16:17

I love it!! It's so unbelievably glorious. I'm so excited for you and i havent a clue who you are. I bet you can't wait to start her up, she'll have heaps of grunt. It's like the ultimate street/strip setup, i could only wish of a motor like that at the moment. Good luck with her. You should post a video clip of her first start up and run in. And post dnyo results if you plan on dynoing it.

brenx · 03-01-2005, 19:24

mmm nice

Brenden

XFFAIRMONT · 03-01-2005, 23:01

What is that that the fuel line connects to on the inside of the gaurd then runs to the carb? Is it a filter or regulator?

falcon coupe · 03-01-2005, 23:35

Very tidy job, looking good.

tony xa · 03-01-2005, 23:50

Thank you all for your comments
davis, thanks for the advise I am going to take a look at re routing the fuel line.
xffairmont, thats a mallory fuel regulator and as soon as its started and run in it will be off to be dynoed and then I will post results for all to see.

PS Thanks to all that helped with advise on this engine

XD408 · 03-02-2005, 00:32

Thats a beautiful looking engine bay cant wait to hear how it all goes, you didnt happen to work for superoo falcon spares in armadale and be a member of the GT falcon club??

xw383 · 03-02-2005, 02:35

Very impressive alot of hard work involved there. Going to be a very interesting ride being a manual