ESP

Has anybody fitted a 2V TFC Manifold to a Clevo in an XE.
I'm trying to figure out what sort of clearance I'll get.

I'm currently running a Redline Torker Manifold with a 1/2 inch spacer. There's a Shaker sitting on top of that. I'd like to swap the Redline for the TFC but need to make sure that the TFC is the same height as the REDLINE. I know that they can be milled down but any help on specs here would be appreciated. I need to ensure that the Shaker will fit again without sitting too high and fouling the bonnet.

Thanks in advance.

__________________
XE ESP The last of the CLEVO's
-----------------------------------------------------------

TruBlu351

Mate, unfortunately I think you'll have a hard time fitting a TFC under your bonnet with a shaker.

As you know, with your redline, the shaker fits snug. My weiand xcelerator is a tight fit aswell. The TFC's I believe come with 2 different sizes. One is the hi-rise and the other is obviuously shorter, but she still sits pretty high.

All the ones I've seen have bonnet scoops. At least you already have the hole in the bonnet!

I bought a hornet scoop last week and I'll give the shaker a rest so I can try my 2" spacer.

__________________
XE Falcon
393 Tremec TKO 9"