Ford Forums banner

vortech charged 351c

1K views 2 replies 2 participants last post by  musclemustang8 
#1 ·
is there a kit or brackets for using a vortech centrifugal blower on a 351c? i cant find anything about it anywhere but i am sure someone has a vortech on there own 351c. if not does anyone have a 6-71 on their cleveland. do you have to have a crank trigger b\c of distributor placment
 
#2 ·
hi musclemustang8,

i have a whipple supercharger mounted on a lightly modified 6/71 manifold.

Just the bolt holes needed readjusting for blower placement

It really depends on whose manifold you are using as to the height it will give.

i have just over 4mm gap between my leads on the dizzy cap to the blower snout

My advice, mount your blower and manifold, then see if the dizzy fits. Don't spend any more money unless you need to.

cheers
gus351
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top