Trav 351

What could I expected with something like this?

750 DP Holley.
Weiland Excellerator 2V manifold.
Ported & polished 2V heads with 4V single groove valves.
Bored 30 thou'.
Flat top pistons and moly rings.
Gear drive set
Balanced crank & rods
Pacemaker extractors
Dual 2.5inch exhausts

I have no idea on what cam to choose.
Car will be driven 80% street driven.

What could I add or change?
Can you give me some quality brand names for parts.
I'd like everyone’s opinions.

Cheers.
.Trav.

clevo400

Tell me the quarter mile time, diff ratio, tyre size and stall convertor rpm and I can try to work out the cam to suit you !!!

__________________
regards
Stephen

russxr67

here are two tips for you.forget your 4v valves and forget your geardrive.you can make good power with 2 v sized valves and you don,t need a geardrive .a good quality timing set is all that you require unless you want the associated noise factor.

Trav 351

Diff ratio will be 3.7 but possibly go up to 4.11, tyre size is 235/60-14 atm but will probably go to 235/45-17. Stall convertor will be 2500-3000rpm.
Did you want the 1/4mile time i want to achieve or what it can do now?
Sorry i cant be more specific. Its all just ideas at this point.
Thanks. Trav.