4 barrel throttle body - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

347 · 06-19-2004, 01:21

Has anybody used 4barrel efi setup? or know anybody who has?
Was it any good?

eb2flyz · 06-19-2004, 22:28

what exacly is it going on?

347 · 06-19-2004, 22:31

For the continuation of this thread..........my 347 currently running webers.

eb2flyz · 06-19-2004, 22:47

so haave you thought about going to a late medel fuel inj setup, an eb is a good choice to get the computer from and all the rest if the inj needed for the coversion, and then you can run a twEECer to give you adjustment of the EEC, thus giving you the ability to modify the parameters to suit your combo.

for more info go to www.icenet.com.au/~pie he has done plenty of conversions like this and has had a lot of good results

347 · 06-19-2004, 23:58

Do you think an eb manifold set up will do the job with my heads and cam?

eb2flyz · 06-20-2004, 02:23

i would suggest running a tfsr intake, 30lb inj,75mm t/b, 75mm egr spacer, 70mm maf, stock fuel rail, adj fuel press regulator, high flow fuel pump, eb EEC and twEECer to tune it. if you can get the harness with the eec it would make it a lot easier to setup,

347 · 06-20-2004, 02:37

I am a total novice on efi........is the TFSR set up an upper and lower manifold?

eb2flyz · 06-20-2004, 02:50

most of the fuel inj manifolds for the windsor are of a two peice design, check this link out for more info on the tfsr manifold

http://www.trickflow.com/product/man...i_51500003.asp