Another gas question - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

zc347 · 08-10-2003, 20:19

I saw this on ebay and was wondering if it was a good deal, and if it would be able to make 400+ hp i'm aiming at. Obviously i'd need to replace the manifold with one suitable for my 302 windsor. (anyone got a twin carby manifold for a 302 they don"t need?)

http://cgi.ebay.com.au/ws/eBayISAPI....category=32624

xdc351 · 08-10-2003, 20:36

Quote:

Originally Posted by zc347

I saw this on ebay and was wondering if it was a good deal, and if it would be able to make 400+ hp i'm aiming at. Obviously i'd need to replace the manifold with one suitable for my 302 windsor. (anyone got a twin carby manifold for a 302 they don"t need?)

http://cgi.ebay.com.au/ws/eBayISAPI....category=32624

You would need to be making 400+ HP for this setup or you'll lose power! If your going to be making huge HP from gas this would be ideal. Your bigger challenge may be finding a low tunnel ram from your windsor.

Much cheaper than gas research though.

zc347 · 08-10-2003, 20:51

Just for the record, my planned setup is 347 windsor with roller cam 3000 - 6500rpm and approx 400hp on straight gas. Heads are original C9OE castings which have been ported to the max and have bigger valves.

AndrewsXR8 · 08-12-2003, 16:19

I was looking into doing a similar thing, and couldn't get a low-rise tunnel ram for a windsor. So i'm gonna have a go at making one when I get a bit(lot) of spare time.