*i2ayman*

Just been surfing ebay america looking for 5.0l parts and i noticed this....

I got some pullies in from the states a while back, and frieght was not expensive... you'll need to increase the hole size in the middle of the water pump pulley, and elongate the holes for bolts or drill new ones offset from the existing ones....

http://cgi.ebay.com/ebaymotors/ws/eB...938354140&rd=1

So i thought i'd share the info with ya's... my machinist charged me $40 to modify my pulley.

__________________
EF XR8 Manual
Mods: Polished GT40 intake/Engine cover, FMS Phenolic spacer, 65mm FMS T/B, 70mm MAF, Underdrive pullies, Crane 1.7 rr's, genie extractors, TV/In car computer/DVD

1bad51

why go to all the hassle of change and searching for bought horspower take the motor you have find a good machian shop balance it hypa pistons up compresion and do some good old port work. Basics then find a dame good dyno like redcliff dynos

MADNC_8

because, there is plenty of bolt on stuff to give horses.

just think, motor rebuilt, ported etc like you say, plus the bolt ons hmm...... more power.