RevHeadRon

just curious as to which model vehicles came with fuel injected 351 windsors? i was pretty sure some of the F series utes like f100's had them just want to make sure and not just dreaming

__________________
"Buy a holden and be a morjority or buy a ford and be quick"

cogo_81

Yer some of the f-series from mid 80's to mid 90's had the fuel injected 351w and the e-series american vans and also I think there was a mustang that came out with a 351 injected

RevHeadRon

where would i be able to find one in australia?

__________________
"Buy a holden and be a morjority or buy a ford and be quick"

ebxr8240

NOT very many I'm afraid came out in Mustangs.The 95 Cobra and some Saleens [351sc] but you won't be getting the engine out of one of them...
In Aussie the F150 and most of them were 5.0's..The inlet and eec needs to be changed as they're map sensered..But there are inlets and a conversion to maf sensred...Btw they are flat tappet up to 95 so good luck getting a roller 351...

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

anakha

None of the trucks with the 351w used roller cams but if you find a block with a casting number beginning with F4TE then it will accept a roller cam without any expensive lifter/cam gear.

Also '95 and up 351w California trucks and all such trucks in '96 should be MAF.

cogo_81

you can get one from eagle auto spares they have a website, I think they qutoed me $3500 for a short engine and about $5000 for a long engine

gtcoupe95

try supa F spares Melb 03 93052522. . F truck spares QLD 07 3823 1031. eng centre Melb 03 87905942. fseries spares QLD 07 32835000. F-trucks r us 03 97288411.. that should get you started i hope

__________________
95 Mustang GT 302: VQ-S2 Vortech - Edelbrock Intake - BBK 70mm TB - UPR Boostpipe - TwEECer - Walbro 255 & T-Rex fuel pump - MSD btm - Crane HI-6 - 36# injectors - Pro-m 80mm MAF - Kirban FPR - FMS 9mm leads - FMS 3.73 Gears - Transgo Shift kit - B&M cooler - Saleen guage pod, FMS Boost and FP guages - R/H drive - Eibach Springs - Holley headers, http://www.meales.com.au

RevHeadRon

cheers for the help guys, my plan is to use the efi setup on the 51windsor and then run either a turbo setup or supercharge it

__________________
"Buy a holden and be a morjority or buy a ford and be quick"