Fresh1965

Hey fellas,

Im building myself a healthy little 302w for my 65mustang. Looking around the 400hp mark so far NA, but i need a hand with the dial in specs of my cam.

Ford Motorsports SVO Hydraulic Roller Cam F303 with the following specs:

288/288, 226/226 @ .050", .512/.512 lift 109/119 lobes

Anyone have experience with this cam?

I need to know the dial in specs.

Thanks in advance.

ebxr8240

Yep Lumpy as!!!
I'd consider the TFS ll cam...http://www.trickflow.com/product/prfeature_index.htm

Depending on rest of combo ???
Have you considered a custom cam from Ed Curtis ???
http://www.flowtechinduction.com/

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

347

400hp 302...........not with that cam.

__________________
What ever I have will never be enough !
Fear is only Fear itself !

http://members.optusnet.com.au/~two89w/

Fresh1965

I have already bought this cam.

347, why you say not 400hp with this cam? Desktop Dyno shows almost this.

BLKEBXR8

109/119 lobes

You can set the cam up with the intake / exhaust centreline 109 being degrees at max lift intake. Take degree reading at 10thou before max lift & 10thou after . Halve the total amount of degrees & add to the lesser figure .
EG:99 @ 10thou before 119 @ 10thou after , difference 20 , add 10 to 99 =109

MrLandau

What are the rest of the specs on your motor?
Shane

__________________
PM me for your Pro-M prices

The 2 drag racers addages
1. If you are in control - you haven't got enough Horse Power...
2. If you throw it up in the air and it comes down - It's too heavy...
My Toys:
1998 NL FBT 033, Blue
1996 NL V8 Fairlane Ghia, YBESLO White, Grey trim, 16" V5 Simmons, LOW

Squeezed is nice, stroked is good, blown is unbeliveable - but all 3 is heaven

Fresh1965

check pm

347

Small cubes need more cam to make 400hp.
Bigger cubes need less cam to make 400hp.

The ford muscle web site did an article on building a 400hp/302.
The cam they used (if my memory serves me right) was 238@ solid roller.

__________________
What ever I have will never be enough !
Fear is only Fear itself !

http://members.optusnet.com.au/~two89w/

347

Fresh are you in sydney?

__________________
What ever I have will never be enough !
Fear is only Fear itself !

http://members.optusnet.com.au/~two89w/

Fresh1965

Yep, im in Sydney, ill shoot you through a pm