Hunting Rev's - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 05-31-03, 07:42 PM
Posts: n/a
Hunting Rev's

Help required, my EBGT(man) starts hunting after a good run along a freeway and then I stop at traffic lights the idle fluxuates between 750-1400 rpms, to try and solve this problem I have replaced- leads,spark plugs,oxygen sensor's,TPS, had ECU checked and comes up clear???? whats left as I'm finding it hard to rectify problem.
Sponsored Links
post #2 of 3 (permalink) Old 06-01-03, 01:32 AM
Two SC 61's = trouble
ebxr8240's Avatar
Join Date: Jul 2001
Location: Penrith,nswAus/Morrinville.NZ
Age: 62
Posts: 6,360
Check for crap in your isc.. idle speed control.. It's the other connection on your throttle body..Try spraying with t.b cleaner...
Or it's not working , disconected ???

Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...
ebxr8240 is offline  
post #3 of 3 (permalink) Old 06-01-03, 03:40 AM
3FB Educator!
B-1B's Avatar
Join Date: Mar 2003
Location: Educating some of the brothers
Posts: 527
Check your Mass Air Sensor,there may be crap built up on the two small bare wires.
Also check the connecter plug to the Mass Air.

There's a bear in there.
Due to the graphic nature of this programme
listener discretion is advised
B-1B is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Windsor Tech
Gear in this thread - Powered by O'Reilly Auto Parts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch stays engaged at high revs Grant Porter Trans | Driveline 5 04-18-03 04:35 PM
Revs dropping too fast during changes. cArSiK General Tech 34 03-11-03 03:50 AM
EA giving high revs... while driving!!! Troutman General Tech 6 07-31-02 01:43 AM
revs are slow to come down NAPARM General Tech 10 06-14-02 08:43 PM
Why do the Revs drop? Griffyn General Tech 5 04-19-02 12:25 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome