Beastford

ive got the exhaust and extractors, what mod should i do next? underdrive pulleys? chip? something else?

laminge

I think getting air into the car is the next step. Filte, Intake, throttlebody

From there I would look at maybe a set of GT40 headers.

Then look at some type of engine management

EDXR8

I would be upgrading the intake snorkle to an EL XR8 or AU XR8 snorkle and a K&N airfilter because it is cheap and easy ($100-$150). After that it depends on how much money you want to spend, first I would be doing an intake swap to an AU type Explorer intake ($600) or an edelbrock/trickflow one ($1100). Upgrading the heads to GT40P's or aftermarket alloys would be good too but expensive. Other than that, cam and roller rocker upgrade would be the next thing I would do.

NZ

Basically anything from the heads up is crap. But gotta start somewhere huh. Take your pic on what you wanna change.

__________________
Dot Aye You

eb2flyz

i would suggest getting some more air in first, 65mm t/b, au maf, k & n panel filter, these few small mods will get you ready for future upgrades like manifold, heads and cam.

__________________
std stroke, alloy heads, comp cam, tfs manifold, 75mm t/b, 70mm maf, 30lb inj, adj fuel press reg, twEECer

http://www.fpvtickfordclubwa.com.au/phpBB2/index.php

http://www.tweecer.com

http://www.icenet.com.au/~pie