NZ

Ive got everything off no sockets are big enough. is it 1'? it looks about that size.

My outer ring of the balancer also slid right off

__________________
Dot Aye You

EDXR8

15/16" socket fits it nicely

ebxr8240

Yes from memory about 22mm but 15/16 is the right size...

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

4.9 EF Futura

Shit, that's not cool ;(

__________________
1995 EF Futura: 4.9L V8 w/ Powerdyne Supercharger @ 7-8psi. Water Injection @ 3psi and above. Vortech Rising Rate FMU. 73mm C&L MAF. Shift Kit, VSS override, TCC override. Blue dash. Custom blue courtesy lights. Switched A/F meter, boost/vac and oil psi gauges. 6.5" TV, CarPC w/1500+ MP3, DVD and porn, precious porn

NZ

All fixed. the slight vibration is still there at 1200rpm but i can live with that. My timing was also at 26 degrees possibly because the dizzy was out when the manifolds went on. 15/16 is closer to 24mm as well.

__________________
Dot Aye You