What will this engine amount to??? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 03-27-06, 06:34 PM Thread Starter
Registered User
Join Date: Feb 2006
Location: Adairsville, GA
Age: 40
Posts: 17
What will this engine amount to???

Okay lets see what type of tongue lashing this can bring on. Built Ford 302 from the following:

1. Bare Block (includes Crank assy) is from a 1986 Ford thunderbird H.O. roller motor.
2. Cylinder heads From 1968 Mustang 302. 63 cc or less. 1.78" Intake Valve 1.45" Exhaust Valve. Standard Porting sizes.
3. Flat Tappet Cam: SMOOTH IDLE, DAILY USAGE, OFF ROAD, TOWING, ECONOMY, ALSO MILD TURBOCHGD, 2200-2600 CRUISE RPM, 8.0 TO 9.5 COMP. RATIO ADV. (50 STATE LEGAL, PRE-COMPUTER, C.A.R.B. E.O. D-225-32). BASIC RPM 1500-4500. Lift: .456 int/ .484 exh.
Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 19 BTDC 61 ABDC 260 °
Exhaust 69 BBDC 23 ATDC 272 °

4. Edelbrock Performer intake manifold Idle to 5500 Rpm Range, dual plane.
davesbronco is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Windsor Tech
Gear in this thread - Powered by O'Reilly Auto Parts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome