wher to get MAF - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

AU2XLSV8 · 10-02-2005, 04:17

I need a larger MAF for my stroker engine. With all the upgraded components the MAF is definetly holding her back now. 90mm lightning MAF or one of Pro M's offerings. I need it quickly and i don't want to make a mistake in choosing. I've tried PMing Mrlandau (shane) with no responce as yet.
I've go a 90mm blowthrough cal'd for 42lb injectors but my setup is N/A and i'm going to run 30's.

EDXR8 · 10-02-2005, 04:28

Batterns have the 90mm LMAF's for $255, that would be the quickest way but obviously you will need to recalibrate the chiptorque for it.

AU2XLSV8 · 10-02-2005, 04:39

Sweet! Thats what i wanted to hear. Yes it's going to chiptorque anyway so that might work well.
Any reasons not to use an lmaf?

EDXR8 · 10-02-2005, 04:54

The only issue with them is that they are BIG. They have a 100mm (4") outlet which means piping can be a bit difficult to sort out. The transfer function is easy to get hold of but I found I needed to lean the curve out a fair bit, still it should be far more accurate compared with the Pro-M MAFs.

AU2XLSV8 · 10-02-2005, 05:01

Will i be able to pug it in and run the car before the tune. I'd preffer to get Widowmaker to set my intake up as aposed to chiptorque doing it!

EDXR8 · 10-02-2005, 05:11

No I just checked and the MAF curve is too different and it will run damn lean.