Finally got round to getting my 3k service on the Typhoon. I asked for the oil and filter to be changed, but the dealers reckoned they couldn't get a filter from anywhere... none available from Melbourne. Anyone else had a problem?
Finally got round to getting my 3k service on the Typhoon. I asked for the oil and filter to be changed, but the dealers reckoned they couldn't get a filter from anywhere... none available from Melbourne. Anyone else had a problem?
The Typhoons filter is about half the height of a normal filter as it has the oil cooler block between it and the filter mounting pad, so mounted on top of the oil cooler block it is about the same height as a normal filter once in place.
There are no filters available i sent a pm to flint asking when had no reply!
so now i am going to send a letter to ford that it is a disgraced if my engine blows i will sue there ass.
There are no filters available i sent a pm to flint asking when had no reply!
so now i am going to send a letter to ford that it is a disgraced if my engine blows i will sue there ass.
I have had a look at my job sheet for my 3K service which included the OIL and filter Change (so they say) :fraz: . They have quoted me the following part number for the Oil Filter: F1AZ 6731 BD
Plenty to choose from and I didnt bother with any more as this should find you one easy enough.
Ryco Z516
FORD F1AZ-6731-BD
Luberfiner PH820
DescriptionInchesMM
O.D.:3.64 [92mm]
I.D.:M22 x 1.5
Special Thread- Height:3.20 [81mm]
Gasket:26-29376-
PSI Relief:Yes-
Anti-Drain:Yes-
Cross Reference Results
Jump to part #: F1AZ6731BD
Crosses for F1AZ6731BD
OEM Mfr FORD
Part Type Fleetguard Part LF3681
Manufacturer
Lube, Full-Flow Spin-On
or
Upgrade LF16002
Part: LF16002
Manufacturer: FLEETGUARD
Part Type: Lube
ADBV: Yes
BPV Setting: 55 kPa (7.98 PSI)
Overall Height: 97.79 mm (3.85 in)
Largest OD: 93.73 mm (3.69 in)
Thread Size: M22 X 1.5-6H INT
Additional Information:
Upgrade of
LF3681 Synthetic Media Upgrade
Part: LF3681
Manufacturer: FLEETGUARD
Part Type: Lube, Full-Flow Spin-On
ADBV: Yes
BPV Setting: 55 kPa (7.98 PSI)
Overall Height: 97.79 mm (3.85 in)
Largest OD: 93.73 mm (3.69 in)
Thread Size: M22 X 1.5-6H
Additional Information:
FORD F1AZ6731A MOTORCRAFT FL820
For upgrade, use
LF16002 Synthetic Media Upgrade
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!