Quarter mile times/speed - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
F6 Typhoon | XR6 Turbo Turbo Talks start here.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 04-14-05, 02:56 AM Thread Starter
Registered User
 
Join Date: Dec 2004
Age: 42
Posts: 111
Quarter mile times/speed

What sort of quarter mile times/speeds are you getting out of the stock XR6 turbo falcs?
thanks jake

MrMercury is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 04-14-05, 04:57 PM
Registered User
 
TJS-81's Avatar
 
Join Date: Oct 2003
Location: Central Victoria
Age: 34
Posts: 267
Re: Quarter mile times/speed

Looking at around 14.5 aren't you guys?
TJS-81 is offline  
post #3 of 12 (permalink) Old 04-14-05, 06:10 PM
FF Moderator
 
CDAA's Avatar
 
Join Date: Aug 2002
Location: South Australia
Age: 46
Posts: 2,202
Re: Quarter mile times/speed

Haven't seen any 'average' times for the XR6T 6 speed manuals recently, but the auto's on a cooler day are averaging 14.1 to 14.3 stock. Not sure of the terminal speed however. Motor recently tested the Mk2 with the 6 speed, but it was 40 degrees and the car suffered terribly in the heat (like most turbo's) with a 14.8. This would not be considered average however for this model.

Design for every step. www.cdaa.com.au

WASP GT - Mk2 6 speed + Herrod =
CDAA is offline  
post #4 of 12 (permalink) Old 04-15-05, 12:59 AM Thread Starter
Registered User
 
Join Date: Dec 2004
Age: 42
Posts: 111
Re: Quarter mile times/speed

thanks guys .seen one at drags the other day and only did 14.6 (ute).
spose they'd be a bugger of a thing to launch with all that tourqe
MrMercury is offline  
post #5 of 12 (permalink) Old 04-16-05, 05:36 AM
Registered User
 
Phils XM's Avatar
 
Join Date: May 2004
Posts: 13
Re: Quarter mile times/speed

I've done 14.308 @ 101mph and yes it is a bugger to get away cleanly.
A best 60ft 2.44 (bogged down) was even slower with wheel spin

XR6T manual ute 14.3@100mph 1/4(wsid)
351xd manual 9.2@76mph 1/8(cid)
MKI 2door Cortina.
Too much power is not quite enough
Phils XM is offline  
post #6 of 12 (permalink) Old 04-16-05, 07:02 PM
I am a Turbo Wanker
 
YOOT's Avatar
 
Join Date: Jun 2002
Location: Brisbane
Age: 34
Posts: 2,379
Re: Quarter mile times/speed

My very frist attempt I got a 14.7@98Mph, 2.4sec 60ft. If I get a chance to practice expect to see a stock ute do 14.3 at best at around 100mph - I havn't driven down the 1/4 since.

The Aussie record for stock sedan manual is 13.85@101MPH by xxxr6t of the XR6 Turbo Forum. Was done at Moterplex, WA on the 7th April 2005.
24 degrees ambient and 32 degrees track with 60% humidity.
His 60ft time was 2.16sec.

256rwkw @ 1920kgs
YOOT is offline  
post #7 of 12 (permalink) Old 04-18-05, 03:10 AM
Registered User
 
Phils XM's Avatar
 
Join Date: May 2004
Posts: 13
Re: Quarter mile times/speed

Quote:
Originally Posted by YOOT
My very frist attempt I got a 14.7@98Mph, 2.4sec 60ft. If I get a chance to practice expect to see a stock ute do 14.3 at best at around 100mph - I havn't driven down the 1/4 since.

The Aussie record for stock sedan manual is 13.85@101MPH by xxxr6t of the XR6 Turbo Forum. Was done at Moterplex, WA on the 7th April 2005.
24 degrees ambient and 32 degrees track with 60% humidity.
His 60ft time was 2.16sec.

This could get ugly!!!

Define "stock"

This claim is under this exact cloud on the XR6T forum.

XR6T manual ute 14.3@100mph 1/4(wsid)
351xd manual 9.2@76mph 1/8(cid)
MKI 2door Cortina.
Too much power is not quite enough
Phils XM is offline  
post #8 of 12 (permalink) Old 04-18-05, 07:32 AM
Weapon of HSV Destruction
 
Dannopower's Avatar
 
Join Date: Dec 2004
Location: Canberra ACT
Age: 37
Posts: 161
Re: Quarter mile times/speed

With a cold air intake, K+N filter, and the centre muffler removed, I ran a 14.49 at 101mph in my Ute. I think thats about average.

Havent tried it since the edit, but it will be certainly different running 11psi!

Mandarin MK1 XR6T Ute, XTREME tuned Auto with PWR Trans Cooler, Team XTREME tuned edit, Dual CAI and K+N filter, 968's, Walbro Fuel Pump, Centre Muffler Removed and 4 inch Custom Cat.

288rwkw
Go You Good Thing!!
Dannopower is offline  
post #9 of 12 (permalink) Old 04-18-05, 11:58 PM
I am a Turbo Wanker
 
YOOT's Avatar
 
Join Date: Jun 2002
Location: Brisbane
Age: 34
Posts: 2,379
Re: Quarter mile times/speed

Quote:
Originally Posted by Phils XM
This could get ugly!!!

Define "stock"

This claim is under this exact cloud on the XR6T forum.
Untouched, no changes, never lifted the bonnet up before.

Variations, tyre pressure, fuel type, quantity, weight of driver, driving skill.

256rwkw @ 1920kgs
YOOT is offline  
post #10 of 12 (permalink) Old 04-19-05, 05:29 AM
Registered User
 
Phils XM's Avatar
 
Join Date: May 2004
Posts: 13
Re: Quarter mile times/speed

Quote:
Originally Posted by YOOT
Untouched, no changes, never lifted the bonnet up before.

Variations, tyre pressure, fuel type, quantity, weight of driver, driving skill.

The WA car has CAI and k&n filter . Still a fantastic effort but not stock .

XR6T manual ute 14.3@100mph 1/4(wsid)
351xd manual 9.2@76mph 1/8(cid)
MKI 2door Cortina.
Too much power is not quite enough
Phils XM is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Australian Ford's Discussion > F6 Typhoon | XR6 Turbo
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome