Tell us about your XR6T Mods - Page 4 - Ford Forums

rboksic · 01-11-2006, 05:32

Quote:

Originally Posted by Cop XR6T

Hey people. Just got my hands on a 2004 XR6T from the police force, so im presuming that it has been chipped. Just curious about was size intercooler i could put on it as i want to replace the small one thats onit. Also how much are bigger injectors than standard and wat are a good size to put in it. Thanks

440-480 cc injectors Bosch 968 or the Ford motor sport ones.
both have same spray pattern as the standard ones.
Bosch from $1100
Ford $500
If you change injectors you will need an Edit or piggyback.
The only difference on the Police cars is that it has a digital speed readout

**Big Block Ford** · 01-11-2006, 13:25

Quote:

Originally Posted by Cop XR6T

Hey people. Just got my hands on a 2004 XR6T from the police force, so im presuming that it has been chipped. Just curious about was size intercooler i could put on it as i want to replace the small one thats onit. Also how much are bigger injectors than standard and wat are a good size to put in it. Thanks

I see a post has gone up regarding intercoolers.

GROUP BUY - New front mount intercoolers $145

Master G · 01-11-2006, 21:34

As per signature which means Hi Flow Injectors, APS IC, CAI, Exhaust, also added brembo's, Bilsteins all round. In Street Tune making 355rwkw.

Regards

M G

Geeseman · 01-12-2006, 15:44

Im also with a Phase 3 system, including exhaust, intercooler, air intake, together with unichip (does all the tuning) and edit for base map adjustments. Also have AP Racing brakes to pull it up

Making around 350rwkw.

drftpig2 · 02-20-2006, 02:42

hey guys how use doing?,yeah just wondering what would be the best thing for the ba turbs in regards from $$$$$$$$ to performance?
yes its time for mods!!!!!!!!!!nothing over say 2k........
345rwkw hey geeseman thats some real power!!!!!!!!

Geeseman · 03-01-2006, 02:36

Quote:

Originally Posted by drftpig2

hey guys how use doing?,yeah just wondering what would be the best thing for the ba turbs in regards from $$$$$$$$ to performance?
yes its time for mods!!!!!!!!!!nothing over say 2k........
345rwkw hey geeseman thats some real power!!!!!!!!

yeah its not bad but you get used to it, at least in a straight line anyway.
Driving through the twisties and its probably too much power.

The APS stuff is the best on the market. Exceptionally well engineered.

MCHLUV · 03-01-2006, 18:52

Quote:

Originally Posted by drftpig2

hey guys how use doing?,yeah just wondering what would be the best thing for the ba turbs in regards from $$$$$$$$ to performance?
yes its time for mods!!!!!!!!!!nothing over say 2k........
345rwkw hey geeseman thats some real power!!!!!!!!

i'd definately say for under 2k go the c.a.p.a. flash tuner the unit cost about 1k, the customtune bout $500 good for about 240rwkw or there abouts. otherwise jst get an exhaust.

03-09-2006, 04:39

boys , just wondering i ve recently done a bit of work to my xr t consisting of bigger intercooler , computer injectors 3" turbo back exhaust bored the waste gate a little and wound it to 11psi its running about 300@ wheels had a few problems with feul cuts but all good know . need a bigger feul pump dose anyone recomend anything in particular??

phntmxr6t · 03-09-2006, 05:06

ive just done intercooler , piggy back computer, injectors ,exhaust 3 " turbo back running @12psi its good for 300rwkw

drftpig2 · 03-11-2006, 01:10

yeah nice ,seen that phase II aps kit 300kw!!!didnt know $$$$$$ tho!!
yeah that aps site has some good stuff huh?

does anyone have bov'z on their T's

is that on the standard internals phantom?