Skillz

I've been search in the internet for the wire colours that are connected at the back of the stereo but non of the colours match up at all...

I've asked a few mates of mine who are mechanics and they havent seen this type of wiring before, his words were "it looks like a rainbow"

He said the main 12v supply is suposed to be red, the ignition wire is yellow and ground is black, but i dont have a red, yellor or solid back. There is Green/Black, Black/Green (but it looks like Green/Black), Black/Orange, Orange/Black (but again it looks like Black/Orange) and a Blue/Black, then there is the 4 speak wires which are on a seperate connector but i cant remember the colours of them of the top of my head...

When i've search on the internet i cant find a referance for any of the colours shown above so if anyone knows which wires do what then i'd really appreciate the help!

Thanks,
Skillz

paskalip

Hi. I m also trying to figure out what every wire is for, and i cant find anything relative on the net. Did you figure them out?

paskalip

Ok, here are some of my findings:

speakers: black strip front left
red strip front right
the no strip and purple are for the rear speakers but i dont know
which is which.
Also the polarity is: + white cables
- yellow cables

Other Connections: +12V = big orange/black
ignition cable = blue/black
Ground = (i'm not quite sure about that) big green/black,
(the one that is single)
I couldent figure out what the other 2 cables are for...

Anyway, I installed the amplifier and works just fine :)