Quote:
|
Originally Posted by Walkinshaw
Im going to remove the distributorless ignition system and replace it with my EA MPFI coil and dizzy. Does the dizzy fit in the EF block, and is their mounting provisions for the coil?
|
the ea mpfi dizzy will go in dramas. though you will have to make mounting breackets for the coil, i'd suggest just a 2/3mm flat plate hanging down from 2 of the inlet manifold bolt (pots 3 and 4)
Quote:
|
Originally Posted by Walkinshaw
Im going to take out the EA engine + trans as a single item, and bolt the EF block up to my EA 4speed, im 99.99% sure this will work ok.
|
auto should bolt up as the only change in bellhousing i know of is on the au model.
Quote:
|
Originally Posted by Walkinshaw
Im going to retain the EA engine mounts, although i do have the EF hydraluic mounts, would these be the better ones to use?
|
the ef mounts are better, but i had a look at mine i have know idea how they bolt down (properly), i'd say stick with the ea ones to be safe, although if you manage to install the engine with the ef mounts let me know ;-)
cheers,good luck.joe.
__________________
live in S.E. queensland? bit of a revhead? click here!!-->
speedphreaks

1000hp is underway. rods,pistons here!! t88 on its way!!