Personalize your BA. (LONG)
For those of you interested,the following is a list of settings that you can either change yourself or can be enabled or disabled by your dealer.
Disabled: Means car is in normal mode. Door locks operate in a standard manner either 2 stage unlock or 1 stage unlock.
Enabled: Car is in taxi mode. Remote key operates in a normal manner,but operation of central door lock(CDL) switch on the ICC is different. If any door is unlocked when the ICC CDL button is pressed the passenger doors will unlock (drivers door will remain locked)
Panic Alarm Inhibit:
Disabled: Allows operation of hazards,horn warning and courtesy lamps as a result of pressing of panic alarm button on remote key pad.
Enabled: Disables operation of panic alarm. If this bit is set and panic alarm button is pressed on remote key pad nothing will happen.
Door Trigger Disable Mode:
Disabled: Means dome lamp operation will be triggered by opening and closing of doors.
Enabled: Opening and closing the doors will not effect state of dome lamps ie.Opening a door will not turn on dome lamps, and closing a door will not turn off dome lamps. Also key out/dome on function will not operate. There is still control of dome lamps by operation of the ICC button, and operation of remote key. This bit can be set and reset by either using the WDS or alternatively pressing and holding the dome lamp button on for 5 seconds.
Master Door Trigger Disable Mode:
Disabled: Allows door trigger disable mode to be invoked by pressing and holding of ICC CDL switch.
Enabled: Does not allow door trigger disable mode to be turned on or off by pressing and holding ICC CDL switch.
Hazard Warning Inhibit:
Disabled: BEM will operate the hazard lamps when any remote key is pressed and for key in lock warning. Ie unlock,panic,lock,remote boot release.
Enabled: BEM will not operate the hazard lamps if any of the remote key buttons are pressed.
Horn Warning Inhibit:
Disabled: BEM will operate the horn in the event that the remote lock button is pressed twice within 3 seconds, or if the remote lock button is pressed when a transponder is still in the ignition.
Enabled: BEM will not operate the horn under conditions described above.
Battery Saver Inhibit:
Disabled: Enables battery saver supply to operate as per normal operation.
Enabled: Disables battery saver control by BEM when ignition is off. Remote key operation will not activate courtesy lamps. Door opening and closing will not activate dome lamps with ignition off bacause battery saver is not active when ignition is off. Battery saver will still be active when ignition is in the Accessories or Ignition on positions.
Courtesy Lamp Inhibit:
Disabled: Enables courtesy lamp output driver, such that courtesy lamps operate as per normal operation.
Enabled: Disables courtesy lamp output driver. Courtesy lamps will never operate.
GMH Technology:- Proof cave men do exist
FoMoCo:- Producing tomorrows technology today