Tdayyen

...

EFFalcon

There should be plenty of wreckers in the dandenong area that have the panels you're after.
try ozwreck in dandenong.

__________________
1995 EF II Falcon GLi: Heritage Green, 4spd Auto, AUII 17" Rims, Custom BA Front Bar, Lowered, Gas Research LPG, Clear Indicators, JVC MP3 Headunit, Phoenix Gold 6.5" Splits, Coustic 481QE Amp, Clarion 12" sub, Leather Seats, Power Window Conversion, 3.45 LSD, Pacemaker Comp Extractors, 2.5" Exhaust, Mandrel Bent Intake, High Flow Filter, Wade 1004 110 cam.

In Progress: BA XR Side Skirts, BA XR Rear bar, BA Shifter Handle.

4.9 EF Futura

Can get aftermarket headlights from Fordmods.com

They're aftermarket in the sense they are not genuine Ford - but they are direct replacements. About $110 per side.

__________________
1995 EF Futura: 4.9L V8 w/ Powerdyne Supercharger @ 7-8psi. Water Injection @ 3psi and above. Vortech Rising Rate FMU. 73mm C&L MAF. Shift Kit, VSS override, TCC override. Blue dash. Custom blue courtesy lights. Switched A/F meter, boost/vac and oil psi gauges. 6.5" TV, CarPC w/1500+ MP3, DVD and porn, precious porn

XR6child

Are you sure he needs just the bonnet and lights? If the impact was bad enough to damage two headlights, the bumper, and the bonnet, then its likely that the radiator support panel is damaged as well.

Beleive me, I should know If the support is damaged, when you get the new bonnet and fix it, then nothing (including headlights and bonnet) will line up. It will be unlikely that you will even be able to close the bonnet.

Cheers,
-The Child

__________________

SileNceR

www.ozeparts.com.au

__________________
Rosewood EAII Fairmont 02/90. MPFI 3.9L (formerly CFI), 4spd BTR Auto. Skyline geared 3.45g open center 28 spline 4 pinion differential & axles. 2 1/2" Cat Back Exhaust. King Super Low Springs. Sound: Equalization and amplification by Clarion; Head unit by Sony, Front, Rears and Sub by Pioneer. Planned mods - t5, Extractors, Painting Grey Strips and new front and rear bar.

MADNC_8

fvck, it will need to go on a straightening jig if the door wont open!

thats had quite a hit,
chances are the rad suport is bent, possibly inner guard as well

maybe even chassis damage.

XR6child

Yeah, Sorry to mine the thread my computers had a virus.

But the damage sounds huuge. Thats a massive job, not just a case of buy and bolt on some new panels. Doors wont open, Bonnets bent in half, thermos would be pushing into the engine no doubt, Radiator support will be fuurked.

Good luck mate, PM sundeep, he had an EF you might be able to get the support off. Have fun

-The Child

__________________