INJECTED250

since im over the motor ive got in the eb right now, i decided last night to go out an see what sort of a flogging it would take ( hoping it would blow uf so the nice au motor could go in .....
full lock right and gassed it, engine was bouncing of limiter for about 2 1/2 minutes continul....... These are sooo tuff, was so expecting it to shit its self...
Are all the ford ecu's from eb-el rev limited at 5750..........
People freak out when you show em a vidieo of a ford six bouncing of limiter

__________________
EB FALCON
98 T5 gear box (was auto)
Wade 977b cam
3.7 lsd
AU bottem end
ELXR6 ported Head
PH4480 Pacemakers

stockstandard

mine will, and regularly does rev past 6000 (needle will max out on the guage). The funny thing is that when I got my engine chipped chiptorque told me they would set the rev limiter to an appropriate level for the cam. Ill have to hook up a 10k tacho to figure out what that is.

Before it was chipped and it was an auto it would never go past 5500 no matter what I did.

INJECTED250

i dont have a taco..... i just use rev cut to save my engine :>:>:>

__________________
EB FALCON
98 T5 gear box (was auto)
Wade 977b cam
3.7 lsd
AU bottem end
ELXR6 ported Head
PH4480 Pacemakers

BoZZa17

mmm
im confused with my car
stock ea manual mpi and seems to have no limiter... maxed out the needle a few times doin some standstills. ie. needle pointing straignt down....

got the guys at jim mock confused =\

INJECTED250

Now this comfirms what i had thought that earlier ea mpi didnt have a rev limiter are you sure its deff going past six ..... But im def not goining to get one of them ecu's as i will try to find the mechanical rev limiter (valve bounce or rod comming out)..... hmmm mabie it could be a way to get my au motor quicker

__________________
EB FALCON
98 T5 gear box (was auto)
Wade 977b cam
3.7 lsd
AU bottem end
ELXR6 ported Head
PH4480 Pacemakers

qwikcorty

mines a 88 ea mpi manual, it has a 5600 limiter, they all have them dont they?

__________________
1976 351c td cortina

Thanatos

Mine has a limiter at 5600, too. But if the clutch is in or the car's in neutral, then there's no limiter.

90 EA MPI 5spd.


Cheers,
Dave

__________________

INJECTED250

hmmm ................ weird... it should limit weather its in gear or not

__________________
EB FALCON
98 T5 gear box (was auto)
Wade 977b cam
3.7 lsd
AU bottem end
ELXR6 ported Head
PH4480 Pacemakers

BoZZa17

ahhhhh
that makes me think..,.. a while back i noticed when my clutch is in the outermost position it misses the clutch switch by like 2mm maybe this is y i have no limiter when the clutch is fully disengaged.

INJECTED250

now that would be a kool way to get around the rev limiter

__________________
EB FALCON
98 T5 gear box (was auto)
Wade 977b cam
3.7 lsd
AU bottem end
ELXR6 ported Head
PH4480 Pacemakers