Join Date: Jul 2004
Location: Central Coast NSW
Auto Trans Flush
Just a quick question, the gasket on my auto transmission (ED) is leaking.
Am i correct in thinking that to replace it, I do the following:
1) Unbolt the pan, draining the fluid. (approx 4 litres)
2) replace gasket (possibly filter?) and rebolt pan
3) fill with the correct fluid through the dipstick.
If this is correct, great, if not, where am i wrong? Once i have checked the procedure, i will happily create a new doco with photos for the modifications/routine maintainence section.
Thanks a lot,