shaynet

This a test to start a thread here as previous attempts failed and I don't want to type it all again. If it works this time I will edit it

__________________
The cop said "Do you know why I pulled you over". I said " Well, that all depends on how long you have been following me!"

shaynet

Was unable to edit due to time out.(got sidetracked on phone)

Will axles from a disk brake XE Ghia fit an XD B/W 4 bolt pinion LSD disk brake from an Ex Chaser?

Is the XE centre likely to be LSD and is so will the centre fit into the XD housing?

__________________
The cop said "Do you know why I pulled you over". I said " Well, that all depends on how long you have been following me!"

Mike Gayner

I think as long as they are the same spline then yes, should fit. You'll have to look and see if the XE center is LSD, a simple excersize. Jack up one side of the car, and try to turn the rear wheel. If it won't turn, it's LSD. If it turns, it's open wheel. Obviously make sure the handbrake is off.