pinkbits

my c4 has a oil leek no not an onoin a leak
around the mechanical linkage shaft , it apears you have to change this by getting into the trans to remove the shaft
has anybody done this or knows the best way to go about it

johnydep

Valve body has to come out.

There is a nut on the inside that has to be undone to allow removal of linkage from the outside, then the seal can be accessed.
There are two seals, an O-ring for the kick-down shaft & a lip seal for the shifter linkage.

pinkbits

job done and then i read your reply
thankyou for your input
doing the job was easy , finding the correct seal was not , every spare parts place only had a listing for the borgwarner seal - which is different
but i found some1 that had one