I have been doing some research as to what gears can be put onto the Ford BW diff center (XF-EL).
Basically, the diff gear set out of the VL will need to have the pinyon gear modified to fit into the Ford BW housing.
Has anyone here had a gear machined up?
Any info on which side(bearing/shaft side, or face/gear side), and how much of the gear needs to be taken off will be a great help.
Also, there is no need to suggest using Xr 3.45's, not interested.
Thanks!!
__________________ CAUTION: Slippery When BOOSTING!
only vl 6`s were 3.45. all 8`s are 3.08
the gears for the vl & xr falcons are the same. if you want 3.9 lift them out of a Nissan Pintara.
Think about this one. i have in my xp falcon a chrysler centura diff, xd lsd centre and vl 3.45 diff gears with the centura flange using xy brakes.
__________________
EfII xr6, weld draglites, king spring superlows, Wade cam, pacemaker extractors, 2.5" mandrel exhaust, electronic shift kit and too many more to list on here.
Originally posted by gravelrash Think about this one. i have in my xp falcon a chrysler centura diff, xd lsd centre and vl 3.45 diff gears with the centura flange using xy brakes.
Why use such a narrow combination range? My diff has an XG housing, ED backing plates, VN axles, VS limited slip, AU ABS sensor rings, VQ ABS sensors, VT FRONT brakes and 4.11 gears!
__________________
If you're not driving a manual you're really just steering.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
