Ford Forums banner

Alarm goes off after battery reconnect

5K views 2 replies 2 participants last post by  Dauphin 
#1 ·
Hi everyone,

On my AU2, the Tickford alarm starts blaring away after I turn it to the ON position. I had the battery disconnected to check a fuse and when I reconnected it, then turned the alarm back on, I've got this problem. I tried pressing the unlock button on the keys but it keeps blaring away.

Any suggestions as to the solution?

Secondly, I was checking the fuses because both my headlight bulbs stopped working together at the same time, suggesting they were effected by an electrical problem.

Thanks,

Andrew.
 
#2 ·
I dont have a tickford alarm, but my alarm will go off, i have a sensor open when I re-connect the battery, the way around it should be make sure that all circuits are closed, doors, and put your hand on the bonnet switch so its closed, then alaram and dis-arm alarm should be happy.

Jason
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top