For anyone considering a new intake for CFI engines.. A crazy idea.. - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
General Tech Have a question that is not covered by one of the other categories? This is the forum for all other items not specifically covered in other categories.

 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 12-20-02, 01:54 AM Thread Starter
Chasing down oil leaks...
 
Axeman82's Avatar
 
Join Date: Nov 2001
Location: nearly Kingaroy, Qld.
Age: 34
Posts: 836
For anyone considering a new intake for CFI engines.. A crazy idea..

I was just cleaning my car and I decided to pull the CFI air cleaner setup off and clean the injection manifold under it - then I started thinking about a different intake as some of the others have done..

A bit of research and I've come to the following idea ->

The pipe for a rampod needs to be around 10cm diameter and have a length of 65cm in order to give it a 5L capacity to stop vaccum so I have read somewhere. I was thinking that this would be a piece of piss to get a bit of 4" aluminium irrigation pipe (free from down the paddock) and get it made up to fit. Put a pod filter on the end and duct it into the area where the airbox usually sits. I haven't thought about the cold air bit yet tho... Don't know how well it would work either really..

Dan..

Aluminium polishes up pretty good too...


1988 EA Falcon Pearl Green
Head gasket replacement count - 1



Axeman82 is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > General Tech


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Holdens new V6 EED-250 The Pub 52 08-09-03 11:07 PM
Made In Canada Engines Power All-new Mercury And Ford Minivans RPO83 Ford Worldwide News 0 02-14-03 08:44 AM
Canada Drives Australia: Ford V-8 Engines Shipped Down Under RPO83 Ford Worldwide News 1 11-24-02 08:15 PM
Defective GM engines $30+ Bilion problem. Discovery The Pub 11 03-21-02 07:37 PM
Mazda Commences Production of New I4 Engines LunaticSVT Mazda Forum 0 02-01-02 11:42 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome