Calling all EFI Ford owners! - Ford Forums

07-12-2002, 01:07

Hi fellow Ford Rev heads,

I need your help.
I need to find out as many EEC Catch codes as possible from Ford�s so equipped.
The catch code is located on the EEC connector label and is usually in larger sized lettering than the rest. For example an EB XR8 may have a catch code of 1DEB or a 3.9 CFI EA may have 0DDA. The EBGT and/or Sprint may have a 2DDA or 2DCA.
So if you�d like to remove your kick panel and reply here or by email I would be most grateful.

The reason I need to find as many catch codes as possible is to ensure that I can maintain maximum support for EEC tuning as more EEC�s are �cracked�.

I also need to get Binary Dumps from as many EEC�s as possible. So if there are any volunteers(Perth area at this stage) who�d like to bring their vehicle(or just the EEC) around for me to get a bin dump I�d appreciate it muchly.

Cheers,
Pete.
Performance Is Electronic

Xyphoid · 07-12-2002, 06:46

5DCA - EF Series II Fairmont Ghia
(Tickford I6HP - 4 Speed Auto - 3.23 LSD Diff 15" Wheels)

I think the EEC V Module ID number is 916

I have no Frieaken Idea of how to dump the Binary from the EEC, but If you want to let me in on how to do it, then I wouldnt mind giving it a try, and sending you the Dump ???????

Cheers
Matti

07-12-2002, 07:22

Thanks Xyphoid,

The only way you can get a Bin dump is with a V.02 or higher EEC-Tuner, EEC-Sucka V2 or a soon to be available TweecerRT for EECV. This is the reason I asked for Perth people to volunteer....I can hardly expect people from other states to drive over.
However, now that you have listed the 5DCA as a catch code I can now ask for Perth based EF Fairmont guy's to volunteer for a bin dump. There's bound to be a 5DCA here in Perth.
Any takers?

Thanks again Matti!
Pete.
Performance Is Electronic

Xyphoid · 07-12-2002, 07:34

No Problems !

I know someone with an EF Chaser (Standard 6, Auto, 3.23LSD)
And a stock EF Gli Auto, and I will try and get the catch codes from them for you also !

Cheers
Matti

07-12-2002, 07:58

That'd be great Matti,
Thankyou.

Pete.
Performance Is Electronic

Shark · 07-12-2002, 14:05

XR9UTE,

I have 4DEG on my ECU,sounds like the sort of number your looking for ?

'95 v8 fairmont

Shark

07-12-2002, 16:34

Hi Pete

I would give you mine but I have not seen my car for nine weeks now. Hope Ford have not sold it on me hehe

Matt

07-14-2002, 00:03

Thanks Shark(and Matt when you're ready),
That is the code I'm after. Other specs like series one or two,diff ratio and manual or auto is helpful too.

Cheers!

Pete.
Perfromance Is Electronic

07-15-2002, 05:48

Anymore takers?
BTW Looks like Ive found Smartlock enable for EB-D.

Pete.
Performance Is Electronic

EDXR8 · 07-15-2002, 06:13

My ED XR8 Auto is 3DFA. Some other ED XR8 Autos have 1DEC. Apparently the ED XR8 manual is 3DEA.