EB II - Components for a Stronger Spark - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
General Tech Have a question that is not covered by one of the other categories? This is the forum for all other items not specifically covered in other categories.

LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 05-14-03, 07:59 AM Thread Starter
Insane By Nature
Join Date: May 2003
Location: Melbourne
Age: 33
Posts: 55
EB II - Components for a Stronger Spark

Ok, throw around a few ideas hear people. Iíve got an EB Series II with a 6 cyl engine and I want to know what diameter/brand leads you would recommend for it. Right now its stock but keep in mind its not remaining this way for long. Also want some advice on coils, again what brand and what model within that brand for a little bit extra spark. I am really after a stronger spark here.

Now I know Iíve asked a lot already, but one other question thatís been nagging at me for a while. We all know that NGK make some of the best plugs around. What I want to know is whether its worth just getting Nickel-Alloy V-Grove plugs for my EB II, or if spending the extra money and going straight for the Platinum or Iridium 0.8mm tip plugs is really going to show me any decent improvement? Remember this is a stock engine. If you have had experience with this or know from other peoples experience then please tell me the good and bad points; cause if itís not going to give me a decent improvement Iím not spending that much per plug!

Thanx in advance,
Defective User

defective is offline  
Sponsored Links
post #2 of 2 (permalink) Old 05-14-03, 11:19 AM
345kw of V8 Windsor Power
EDXR8's Avatar
Join Date: Jul 2001
Location: Adelaide
Age: 38
Posts: 2,784
Firstly, the platinum plugs will not give you a huge gain. The main benefit of them is their 80,000km+ life span.

With the ignition system, just get some TopGun or Eagle 9mm leads, a new distributor cap and rotor, and a new stock coil if needed. The stock ignition system, if in good condition, has plenty of spark for any application.
EDXR8 is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > General Tech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
EB backend onto an EA. AUII_Forte General Tech 9 01-06-06 03:18 AM
EB Ė best Exhaust size / Diff ratio for EB II defective Exhaust 17 11-07-04 07:08 AM
Ea or EB blinkAU General Tech 5 06-04-03 08:01 AM
URGENT : CFI->MPI, no spark Sundeep Inline 6 Tech 5 05-06-03 09:47 PM
EB GT Engine Components xafalcon Windsor Tech 52 03-09-03 02:44 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome