Ford Forums banner

Ford Mondeo Misfire

1K views 1 reply 1 participant last post by  Big Block Ford 
G
#1 ·
I recently brought a 1994 mondeo 2.0, 16v 136 PS, whose head gasket had gone. I removed the head which I had skimmed and replaced the head gasket. When I attempted to start the engine I had a misfire. I checked the voltage at the injector solenoids, all had 11v except for cylinder 4. which had no voltage. I followed the cable back to the ECU and there was no voltage on the output pin from the ECU. Replaced ECU, same fault but now engine will not crank and still no voltage at the injector solenoid. Please help.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top