dicast

people im ready to send my 4.1 xflow to get built for a turbo.can anyone recomend a reputable engine builder in sydney.thanks in advance

TD302

Do some reading up and give it a go yourself. It's not that hard. At the end you can say that you built it.

__________________
California Speed Supplies
HOGG Performance (07)33764333
"Blocks and women are the same, if you got a good one it won't need a girdle"

dicast

i was sought of thinking that but ive never built a motor before

BLKEBXR8

You could try Aurther Johnston Engineering in Greenarce young guy there has played around with 250 crossflows had a Cobalt Blue TD 250 injected running decent numbers a couple of years back. Think the Phone number is 9790 6129 don't know wether this is right but can only try .He might be able to help you out.

ebxr8240

Cylinder Heads Dynamic in Penrith..He's a Ford guy and knows his 6's, built a tuff X flow into the 9's ...Ask For Jamie 0247 223575.. He put my Dart block together...

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

dicast

thanks guys for the names and numbers will give em a try