Mod's to TE50 - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
General Tech Have a question that is not covered by one of the other categories? This is the forum for all other items not specifically covered in other categories.

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 06-25-01, 06:34 PM
Posts: n/a
Mod's to TE50

I just purchased a new 200kw TE50, I was wondering what easy mods could be done to increase power to about 240kw. I have already put on a K&N air filter. I was thinking about something like intake mods such as cold air intakes and maybe a larger mass AFM or even throttle body. I don't want to do anything mechanical yet due to the fact it has only 3500km on the clock.
Just some ideas on what power figures will I get. I would be happy with at least 220kw

any help would be appreciated...............

Sponsored Links
post #2 of 3 (permalink) Old 06-26-01, 08:33 AM
Posts: n/a
With the maf & t/body that they allready have you should get near 240.I'm getting near 170 at rear wheels with 70 maf and 65 t/b though that could be 70mm.Guess exhaust "again" 1& 3/4inch extractors may be.Yep K&N carefull on the amount of oil,not too much.Do's that model have the bell mouth or trumpet that sits in air cleaner & maf?As in G.T. That helped on my engine.Though not a te but moded similar?
post #3 of 3 (permalink) Old 07-04-01, 03:44 PM
Posts: n/a
i took my bellmouth out when i had the orginal ECU running in my car (as most know the engine was playing up) and it seemed to run heaps better...? The bellmouth was much smaller than the 70mm MAF though.
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > General Tech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
List Your Mods! Dan [Sac] Ford Probe Forum | Mazda MX6 Forum 10 07-11-03 01:33 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome